Is Your Heating System A Victim Of Short Cycling?

furnace repair in a Hokendauqua Pennsylvania homeWhen the temperature cools, your home’s heating system works more often. But when the furnace cycles on and off frequently, the system might be short cycling. When this happens, it is quite frustrating. R.F. Ohl is prepared to help by offering furnace repair for Hokendauqua PA and surrounding area homeowners who have this type of heating problem. We can offer fast and inexpensive maintenance and repair solutions.

When a short cycling furnace is repaired…

this helps you stop other problems that arise from a short cycling furnace. Not only can this extend the life of the system, but it also helps decrease monthly heating bills. The best way to ensure that this doesn’t continue to happen is to determine what is causing the problem. Also, once the source is found, how can it be fixed? This article will explore a few of the most common furnace troubleshooting tips that cause furnace short cycling issues.

Explore Our Heating Repair Services Schedule A Free, In-Home Estimate

An Incorrectly Sized HVAC System

If your furnace kicks on and off constantly after a new installation, then you’ve got a huge problem to fix. Sometimes home HVAC systems are incorrectly sized. They are just too big for your home. Unfortunately, this causes the inside temperature to go from hot to cold quite often. This pushes your system to cycle between hot and cold air, in a short amount of time. A situation like this causes your heating expenses to escalate. Also, it shortens the life of your system.

Although most homeowners want a system that heats fast…

the ultimate goal is to have one that is very efficient. If your heating system has been short cycling since installation, the heating company may not have been properly sized. Thus, check with a reliable professional who can correctly size your HVAC system.

Overheats

furnace short cyclesMost HVAC systems have a safety mechanism that monitors the temperature. It turns the system off when it starts to overheat.

It short cycles when the heat exchanger becomes too hot which, in turn, makes the burner automatically turn off. If the burner has cracks, this will also cause system short cycling.

This creates another problem. A cracked heat exchanger has a channel from which carbon monoxide could possibly leak into your home. Carbon monoxide poisoning leads to fatalities.

If you think that your system short cycles because of a bad heat exchanger, repair it as soon as possible.

Speak with a licensed HVAC professional that can make the necessary changes ASAP. It is very important that you do not procrastinate in repairing your heating system.

Call Today: (610) 377-1098

Other Possible Causes

  • clogged furnace filterThermostat: Sometimes a damaged thermostat causes system short cycling. The problem may not originate with the actual HVAC system. The thermostat could also be positioned in the wrong place. If it is too close to other heat sources, it won’t provide the right temperature. This would also make your heater automatically turn off.
  • Clogged Filters: When an HVAC system is clogged, this produces a large amount of warm air in the system. Basically, the warm air gets trapped in the system. Thus, this makes the system automatically turn off and on numerous times. Have your system inspected and ensure that it does not get clogged. Check your air filters monthly and change them out when they are dirty.
  • Corroded Flame Sensors: If a furnace flame sensor is covered in rust, it may not function properly. Since repairs involve high voltages and flammable substance, it is imperative that this mechanism is rust free. An annual inspection is required to ensure that flame sensors function accordingly. Although you may want to save money on furnace maintenance and repairs, do not attempt to clean flame sensors on your own. Call a HVAC professional instead.
Learn More About Our Heating System Repair Services Make An Appointment

 

Furnace Repair Hokendauqua PA

Amazingly, many homeowners aren’t aware of the term “short cycling.” Thus, they don’t take it seriously since their home still feels warm.

However, short cycling isn’t something that you should ignore.

When your HVAC system constantly turns on and shuts itself off, this puts wear and tear on parts such as belts, the motor and other essential components.

In addition, this isn’t something that you should maintain or repair on your own. The smart thing to do is to hire a reputable HVAC professional to maintain the integrity of your heating system. An inexperienced technician could cost more time and money, especially if he doesn’t know what is truly causing the problem. In addition, this type of technician could cause more damage overall. Find a good HVAC professional to maintain and repair your home’s heating system. You’ll have a better peace of mind in the long run.

When looking for the best furnace repair near me, be sure to contact R.F. Ohl. We offer high quality HVAC services including furnace repair and heating system tune-ups. Our experienced NATE certified contractors can properly diagnose why your furnace short cycles and offer the appropriate solutions to fix it. We also offer heating oil delivery, HVAC equipment installations, and propane delivery services. Be sure to call R.F. Ohl for all of your home heating and comfort needs.

Some of the areas we service include: Allentown, Catasauqua, Coplay, Laurys Station and these zip codes: 18101,  18032,  18037, 18059 as well as all surrounding areas in the Lehigh Valley, Pennsylvania.

Call Now: (610) 377-1098

Contact us today or give us a call at (610) 377-1098 if you have any questions.