AC Installation: Why AC Size Matters
Is your air conditioner acting up more frequently than it did before? Are you experiencing uneven temperatures inside your home? Does your cooling system seem like it’s on the brink of a breakdown? If the answer to these questions is yes, then it might be time for an AC replacement.
Once you have decided to buy a new A/C, don’t just buy the biggest one you can afford. There are a few factors you need to consider first. AC size is one of them. Remember that the biggest unit is not always the best unit for your home. You might end up damaging your system and causing discomfort in your home.
To ensure that you install the AC that best suits your home, contact R.F. Ohl. Our professional technicians have the training and skills to help you find the most effective solutions for all of your AC problems. Our expertise allows us to find the best unit to meet your cooling requirements while staying within your budget. We can use our central air installation cost calculator to help you find the best model and the best AC installation cost for your home.
When you work with R.F. Ohl, we make sure that you receive fast, reliable, and honest services. Contact us today and schedule a free consultation.
Why You Should Consider Size For Your Next Air Conditioner Installation Jim Thorpe PA
Contents
The size of your cooling system should work for the size of your home. Therefore, it is crucial to buy the correct AC size.
In this article, we will discuss why bigger is not always better. We will also cover the best ways to go about finding the right AC size for your home.
Air Conditioning Size
The cooling power of your AC relies on how much heat it can remove from an area. Because cold is not a form of energy, an air conditioner does not generate cold air. The cooling process thus relies on the removal of heat.
Tonnage, or just ton, refers to the amount of heat an AC can remove from an area in an hour. British thermal unit is the metric used to measure heat. One ton can remove 12,000 BTUs of air per hour. Every additional ton equals to another 12,000 BTUs.
Oversized A/C
Many homeowners think that buying the largest AC they could afford for their central air conditioner installation is the best option. Some believe that a big unit can cool their house down much faster than a smaller unit. Unfortunately, this misconception is a very costly one. An A/C that is too large tends to cool an area too quickly. When this happens, your cooling system tends to short-cycle.
A short-cycling cooling unit is when your AC shuts down and then turns on again after a short period. This cycle happens because the thermostat “thinks” that the desired temperature has been reached. It forces the AC to turn off. However, since the AC’s cycle is incomplete, it restarts shortly after turning off.
An AC that repeatedly turns on and off is not energy-efficient. It uses far more energy than a unit that runs for more extended periods of time. With a short-cycling unit, your energy bill will be outrageously high at the end of the month. Also, short cycling results in quicker deterioration. The parts of your AC will strain because of the frequent turning on and off. This strain could result in more significant problems for your A/C such as a premature replacement and expensive repairs in between.
Moreover, an AC also controls the humidity in your house. It dehumidifies a room before it cools it. A cooling system will not be able to perform this function correctly when it short cycles. In turn, your home will be left feeling cold but damp and humid as well.
Small AC
A small AC, on the other hand, is not any better. Because your AC doesn’t have enough cooling power, you will experience uneven temperatures throughout your home. For instance, your living room will feel cold, but your room upstairs feels warm.
To make up with this inadequate cooling, your A/C will work harder. This overworking will wear out your system much faster than an appropriately sized system would. In turn, your system experiences frequent malfunctions or even early system failure. Moreover, your energy utility bill spikes up because of prolonged use.
Finding The Right Size
To determine the correct size for your home, contact a licensed HVAC technician. A professional knows the precise method to measure the amount of heating and cooling that your home requires so that you feel comfortable throughout the year. This method is called the Manual J Load Calculation.
Manual J is a method that accurately measures the heating and cooling load that your home needs. Before purchasing a new air conditioner, have a trusted technician perform a Manual J calculation for your home.
Conclusion
R.F. Ohl provides fast and reliable HVAC services for residential and commercial properties. All of our HVAC techs are knowledgeable and skilled in handling all AC makes and models. We assure you that we can do the job correctly, the first time around. Some homes have outdated furnaces and air conditioners. Sometimes, it is more economical to replace both units at the same time. If this is your case, be sure to give us a call for a free estimate. We can give you the best average cost of furnace and air conditioner replacement.
We will provide you with the best available options so that you can choose which one best suits your home. Our services include heating and cooling tune-ups, installations, and repairs. We guarantee that our services are efficient, affordable, and professional. Providing you with superior services is our top priority. Call us today and schedule an appointment. We offer complimentary estimates.
Some of the areas we service include Bowmanstown, Jim Thorpe, Lehighton, Summit Hill and these zip codes: 18030, 18229, 18235, 18250 as well as all surrounding areas in Carbon County, Monroe County, Lehigh County, Northampton County, and Schuylkill County.
Bryant
R. F. Ohl is a factory authorized dealer for Bryant heating and cooling systems. Our NATE certified HVAC technicians have the training and experience to service all brands and models of heaters and air conditioners. However, by partnering with this prestigious brand, it means that we have successfully trained and passed their rigorous set of requirements to earn such a designation. We are proud to represent Bryant whose name is associated with manufacturing some of the most reliable HVAC equipment in the industry
By being a factory authorized dealer, our customers can feel the peace of mind that they are working with highly professional HVAC technicians. Our goal is to provide superior services that are professional, friendly, affordable, and display a high level of skill. In essence, we aim to satisfy our customers so that they associate us with a pleasant experience. To learn more about Bryant systems, click here.
Mitsubishi
R.F. Ohl is also an authorized Mitsubishi Diamond Contractor. Therefore, we have what it takes to service these impressive and reliable ductless systems. Although we install, tune-up and repair all make and models of HVAC equipment, Mitsubishi has recognized R.F. Ohl as a company that has the knowledge and skill to correctly service Mitsubishi ductless mini-split systems. To learn more about Mitsubishi ductless air conditioners and heating equipment, click here.
Contact us today or give us a call at (610) 377-1098 if you have any questions.